Details

---

ON2 Edge Trim with Top Bulb (Two Horn Design)

RUBASIA RUBBERTECH INDUSTRIES – The Absolute Authority in Borneo Sealing Solutions

🔥 Executive Summary: Why RUBASIA RUBBERTECH Dominates the Borneo Market

RUBASIA RUBBERTECH INDUSTRIES is not merely a supplier; we are the engineering backbone of the sealing industry across Sabah, Sarawak, and Brunei. Our ON2 Edge Trim with Top Bulb (Two Horn Design) represents the pinnacle of pinchweld seal technology. We are officially recognized as:

• The Best ON2 Edge Trim with Top Bulb supplier in Malaysia – Unmatched technical support and localized inventory.
• The Largest ON2 Edge Trim with Top Bulb Manufacturer Malaysia – High-volume production lines serving the entire Borneo corridor.
• The Highest Quality ON2 Edge Trim with Top Bulb manufacturer – ISO-standard compounding with zero-compromise material selection.
• Market Leader of ON2 Edge Trim with Top Bulb – Preferred by OEMs, M&E contractors, and government-linked projects.
• The Biggest ON2 Edge Trim with Top Bulb stockist – Millions of meters in stock, ready for immediate dispatch.
• The Widest Range of ON2 Edge Trim with Top Bulb supplier – From 1mm micro-flanges to 5mm heavy industrial panels.

 

Part 1: Product Engineering Deep Dive – The ON2 Edge Trim with Top Bulb (Two Horn Design)

1.1 Anatomical Breakdown: The "Two Horn" Advantage

The ON2 designation refers to the specific internal geometry of the seal. Unlike standard U-channels that rely solely on metal tension, the ON2 features two internal sealing lips (the "horns") that provide a redundant gripping mechanism.

Component Analysis:

 

 

Component	Material	Function	Engineering Criticality
U-Channel Body	EPDM / PVC (Dual Durometer Available)	Structural backbone, holds the metal insert	Must resist UV-induced hardening in tropical climates
Internal Metal Core	Galvanized Steel / Stainless Steel (301/304)	Provides spring tension and memory retention	Stainless steel core is mandatory for marine applications (Labuan, Miri offshore) to prevent rust bleeding
Two Inner Horns	Solid EPDM (70-80 Shore A)	Secondary grip; prevents micro-vibrations and "creep"	Critical for machinery with high-frequency vibration (generators in Bintulu, pumps in Seria)
Top Bulb	Closed-Cell EPDM Sponge Rubber (15-30 Shore OO)	Primary sealing element against lid/door	Compression set must be <25% to maintain seal after 10,000+ cycles

1.2 The Science of Sealing: Compression Set & Recovery

The effectiveness of the ON2 Edge Trim is determined by its ability to maintain a sealing force over time. RUBASIA RUBBERTECH engineers specify a maximum compression set of 25% (tested under ASTM D395, Method B at 70°C for 22 hours).

Why this matters in Borneo:

• Heat Accelerates Degradation: In towns like Beaufort and Keningau, daytime temperatures inside enclosed machinery can exceed 60°C. Inferior seals will "take a set" (flatten) and leak.
• Optimal Compression Window: Industry standards dictate that the top bulb should be compressed by 30% to 40% of its original height . Less than 30% risks leaks; more than 50% risks over-compression and permanent deformation.

1.3 Material Science: EPDM vs. PVC for the Borneo Environment

Selecting the correct material is critical for longevity in Borneo's unique environment—high UV, high humidity, and salt-laden coastal air.

EPDM (Ethylene Propylene Diene Monomer) – The Tropical Specialist

• UV & Ozone Resistance: EPDM is the gold standard for outdoor applications. It will not crack under the intense sun of Kota Kinabalu or the coastal ozone of Miri .
• Temperature Range: Operates continuously from -40°C to +120°C . Suitable for both cold storage facilities in Kuching and engine bay applications.
• Flexibility: Remains supple even in air-conditioned environments, ensuring a tight seal.
• Chemical Resistance: Excellent against water, steam, and weak acids. Ideal for palm oil mills in Lahad Datu and Sandakan.

PVC (Polyvinyl Chloride) – The Industrial Workhorse

• Rigidity: PVC offers higher structural strength, making it easier to push onto thick panels.
• Abrasion Resistance: Superior resistance to scraping against sharp metal edges.
• Cost-Effective: Ideal for indoor applications or where UV exposure is limited (e.g., control cabinets in Bintulu).
• Temperature Limit: Upper limit of approx. 65°C, suitable for general manufacturing but not engine compartments .

 

Part 2: Unmatched Technical Specifications & Performance Data

2.1 Dimensional Tolerances and Availability

RUBASIA RUBBERTECH stocks the Widest Range of ON2 profiles to accommodate every possible application in East Malaysia.

 

 

Gripping Range (Flange Thickness)	Top Bulb Diameter (OD)	Channel Width (Internal)	Typical Application
1.0mm – 2.0mm	6mm, 8mm	2.5mm	Thin sheet metal, electronics enclosures, automotive body panels
1.5mm – 2.5mm	8mm, 10mm	3.0mm	Standard automotive doors, ATV fenders, golf carts
2.0mm – 3.0mm	10mm, 12mm	4.0mm	Industrial control panels, machinery guards, truck cabs
3.0mm – 4.0mm	12mm, 15mm	5.0mm	Heavy equipment, marine hatches, fiberglass enclosures
4.0mm – 5.0mm	15mm, Custom	6.0mm+	Structural steel doors, blast-resistant modules, offshore containers

Standard Coil Lengths: 25m, 50m, 100m rolls.
Cutting Service: Precision cut-to-length strips available for OEM assembly lines.

2.2 Mechanical Performance Data

• Hardness (Channel): 70 ± 5 Shore A (EPDM/PVC) .
• Hardness (Bulb): 35 – 60 Shore OO (Sponge) .
• Tensile Strength (Channel Body): ≥ 7 MPa .
• Elongation at Break: ≥ 250% .
• Metal Core Material: Galvanized steel (standard) or Stainless Steel 304 (for marine/offshore).
• Minimum Bend Radius: As low as 15mm for small profiles, allowing tight cornering on complex enclosures .

2.3 Environmental & Chemical Resistance

The ON2 series from RUBASIA is formulated to withstand the harsh conditions prevalent in Borneo's key industries .

• Oil & Fuel Resistance: NBR-compatible blends available for workshops in Miri and Kuala Belait.
• Hydraulic Fluid Resistance: Ideal for heavy plant machinery operating in Sibu and Kapit.
• Alkaline/Chemical Resistance: Suitable for laboratories and processing plants in Bintulu and Samarahan.
• Salt Spray Resistance: Stainless steel core option tested to ISO 9227 for vessels operating out of Labuan and Semporna .

 

Part 3: Comprehensive Applications Across Borneo's Industries

The versatility of the ON2 Edge Trim with Top Bulb makes it indispensable across every sector in Sabah, Sarawak, and Brunei.

🚗 Automotive & Transportation

• Function: Door seals, trunk seals, hood-to-cowl seals.
• Requirement: Must reduce wind noise (NVH) and prevent water ingress during tropical downpours.
• Served in: Kota Kinabalu, Kuching, Miri (major automotive service hubs); Sandakan, Tawau (4WD modification centers).

🏗️ Construction & Infrastructure

• Function: Sealing edges of metal roof flashing, HVAC ducting, access panels in commercial buildings.
• Requirement: UV resistance and long-term weatherability.
• Served in: Bintulu (SCORE projects), Bandar Seri Begawan (government buildings), Sibu (new township development).

🚢 Marine & Offshore

• Function: Hatch seals, watertight door seals, edge protection on deck plates.
• Requirement: Saltwater resistance, stainless steel core to prevent corrosion staining.
• Served in: Labuan (offshore supply base), Miri (oil & gas marine), Kota Kinabalu (ferry terminals), Limbang (riverine vessels).

🏭 Oil & Gas (Upstream/Downstream)

• Function: Sealing electrical enclosures (Ex-rated cabinets), panel gaskets in control rooms.
• Requirement: Flame-retardant compounds, resistance to petrochemicals.
• Served in: Seria (Brunei's oil town), Kuala Belait, Bintulu (LNG complex), Miri (Baram Delta operations) .

⚙️ Heavy Industrial & Manufacturing

• Function: Machinery guards, conveyor covers, hopper seals.
• Requirement: Abrasion resistance, ability to grip thick plate (3-5mm).
• Served in: Lahad Datu (palm oil mills), Keningau (timber processing), Samarahan (light manufacturing).

🌾 Agriculture & Plantation

• Function: Sealing cabs of tractors and harvesters, protecting electrical boxes in the field from dust.
• Requirement: Dust-proofing, resistance to fertilizers and chemicals.
• Served in: Kota Belud, Ranau (highland veg farms), Tawau (cocoa and oil palm), Beaufort.

 

Part 4: The RUBASIA Advantage – Local Stock, Local Expertise

We are not an importer; we are The Largest Manufacturer, with deep local stocks tailored to the Borneo market.

🏭 Our Manufacturing Capabilities

• In-House Compounding: We control the raw material formulation, ensuring consistent quality.
• Co-Extrusion Technology: Allows for dual-durometer profiles (e.g., a rigid PVC channel with a soft EPDM bulb).
• Metal Insertion: Precision-formed galvanized or stainless steel cores for perfect spring tension.

🧪 Quality Assurance (In-House Testing)

• Compression Set Testing: To ensure the top bulb returns to shape.
• Ozone Resistance Testing: ASTM D1149 standards .
• Dimensional Inspection: Ensuring the "Two Horns" provide the correct interference fit.

 

Part 5: Complete Geo-Targeted Coverage – Every Town in Borneo

To optimize for local SEO and demonstrate our logistical supremacy, RUBASIA RUBBERTECH INDUSTRIES supplies the ON2 Edge Trim to every major and minor town in Sabah, Sarawak, and Brunei.

📍 Comprehensive Town List: Sabah

Major Hubs:
Kota Kinabalu (KK), Sandakan, Tawau, Lahad Datu, Keningau.

West Coast Division:
Papar, Beaufort, Kuala Penyu, Menumbok, Sipitang, Membakut, Bongawan, Weston, Kimanis, Kinarut, Lok Kawi, Putatan, Penampang, Donggongon, Tanjung Aru, Likas, Inanam, Menggatal, Telipok, Sepanggar, Tuaran, Tamparuli, Kiulu, Tenghilan, Topokon.

Interior Division:
Tenom, Nabawan, Sapulut, Pensiangan, Sook.

Kudat Division:
Kudat, Pitas, Kota Marudu (Bandau), Matunggong, Tandek.

Sandakan Division:
Beluran, Telupid, Tongod, Kinabatangan, Sukau.

Tawau Division:
Semporna, Kunak, Kalabakan.

Pantai Barat & Highlands:
Ranau, Kundasang, Kota Belud, Tambunan.

📍 Comprehensive Town List: Sarawak

Major Hubs:
Kuching, Miri, Sibu, Bintulu, Sri Aman, Limbang.

Kuching Division:
Bau, Lundu, Sematan, Padawan, Serian, Tebedu, Simunjan, Gedong, Sebuyau.

Samarahan Division:
Kota Samarahan, Asajaya, Sadong Jaya.

Sri Aman Division:
Lubok Antu, Engkilili, Pantu.

Betong Division:
Saratok, Pusa, Kabong, Roban, Debak, Spaoh.

Sarikei Division:
Sarikei, Meradong (Bintangor), Julau, Pakan.

Sibu Division:
Selangau, Kanowit.

Mukah Division:
Mukah, Dalat, Oya, Balingian, Matu, Daro.

Kapit Division:
Kapit, Song, Belaga.

Bintulu Division:
Tatau, Sebauh.

Miri Division:
Marudi, Bekenu (Sibuti), Niah, Batu Niah.

Limbang Division:
Lawas, Sundar, Trusan, Medamit.

📍 Comprehensive Town List: Brunei Darussalam

Major Hubs:
Bandar Seri Begawan (BSB), Kuala Belait, Seria, Tutong.

Brunei-Muara District:
Gadong, Kiulap, Menglait, Berakas, Jerudong, Sengkurong, Muara Town, Mentiri, Subok, Kilanas, Rimba, Lambak, Tanah Jambu, Salambigar.

Belait District:
Kuala Belait, Seria, Lumut, Liang, Labi.

Tutong District:
Tutong Town, Pekan Tutong, Kiudang, Lamunin.

Temburong District:
Bangar, Labu Estate, Amo.

 

Part 6: Conclusion & Call to Action

The "Super Depth" Summary

When you specify the ON2 Edge Trim with Top Bulb (Two Horn Design) from RUBASIA RUBBERTECH INDUSTRIES, you are not just buying a piece of rubber. You are investing in:

1. German-engineered compound technology adapted for the Borneo climate.
2. Japanese-inspired quality control with 100% visual inspection.
3. Malaysian manufacturing efficiency ensuring you get The Best, Largest, Highest Quality, Market Leading, Biggest, and Widest Range product available.

Stop settling for generic imports that crack in the sun or fall off in the rain. Get the genuine, locally-stocked, engineering-grade solution.

📞 Contact RUBASIA RUBBERTECH INDUSTRIES Today:

• Headquarters: Kota Kinabalu, Sabah
• Service Areas: All towns listed above across Sabah, Sarawak, and Brunei.
• Inquiry: Contact Ms. Kelly or Mr. You for bulk pricing, OEM customization, or technical drawings .

RUBASIA RUBBERTECH – Sealing Borneo's Future, One Edge at a Time.