Details

---

🧰 How to Install Round External Rubber Cap — Step-by-Step Guide by RUBASIA RUBBERTECH INDUSTRIES

Installing the Round External Rubber Cap is a simple, tool-free process that can be completed in minutes. Designed for both DIY users and industrial installers, these caps ensure maximum protection and perfect fit when properly installed.

Follow these detailed steps to achieve the best results:

 

🔹 Step 1: Identify the Object to Be Covered

Decide where the rubber cap will be used.
Common applications include:

• Furniture legs (chairs, tables, cabinets, racks)
• Metal pipes and steel tubing
• Bolts, rods, or round frame ends
• Hydraulic or pneumatic tube openings

 

🔹 Step 2: Measure the Outer Diameter

Use a digital caliper or measuring tape to measure the outer diameter of the round object (leg, pipe, or tube).

⚙️ Example: If your chair leg measures 25mm in diameter, select a 25mm Round External Rubber Cap.

RUBASIA provides a complete range of sizes (9mm, 12mm, 16mm, 19mm, 22mm, 25mm, 28mm, 32mm, 38mm, 51mm) — ensuring perfect fitment for any application in Sabah, Sarawak, or Brunei.

 

🔹 Step 3: Clean the Surface

Before installing, wipe the leg or pipe end clean using a dry cloth to remove dust, oil, or rust.
A clean surface ensures a tighter grip and longer lifespan of the cap.

 

🔹 Step 4: Prepare the Rubber Cap

For a smoother fitting:

• You may soak the rubber cap in warm water (about 40–50°C) for 1–2 minutes to soften it slightly.
• This helps when fitting over larger or tight metal tube ends.

⚠️ Avoid using excessive heat to prevent deformation.

 

🔹 Step 5: Fit the Rubber Cap

Hold the cap firmly and press it straight onto the round leg or tube.
Push until the rubber lip fully covers the end.

If resistance is high:

• Apply a small amount of soapy water or silicone spray on the leg for easier sliding.
• Do not use oil or petroleum-based lubricants, as they can degrade the rubber.

 

🔹 Step 6: Check the Fit

Ensure the cap:

• Sits evenly around the tube circumference.
• Does not wobble or slide off easily.
• Has full contact with the bottom surface.

✅ A properly installed cap will stay firmly in place and offer excellent protection, anti-slip performance, and noise reduction.

 

🔹 Step 7: Test for Grip & Stability

Gently move the furniture or shake the tube to confirm that the rubber cap holds securely.
If it feels loose:

• Recheck the diameter measurement.
• Consider one size smaller for a snugger fit.

 

🔹 Step 8: Maintenance & Replacement Tips

To maintain performance, check the caps every few months:

• Wipe clean with mild soap and water.
• Replace any cap that shows cracks, flattening, or wear.
• Avoid prolonged contact with oils or strong solvents.

Replacement rubber caps are readily available across Borneo’s major towns and industrial areas, including:
Sabah: Kota Kinabalu, Sandakan, Tawau, Lahad Datu, Keningau, Kudat, Ranau, Papar, Beaufort, Sipitang.
Sarawak: Kuching, Miri, Sibu, Bintulu, Limbang, Betong, Kapit, Sarikei, Mukah, Serian.
Brunei: Bandar Seri Begawan, Kuala Belait, Tutong, Seria, Jerudong.

 

💡 Professional Installation Tips from RUBASIA RUBBERTECH

• For heavy-duty industrial use, apply a tiny drop of adhesive (non-corrosive rubber-safe type) inside the cap for extra grip.
• For outdoor furniture, choose UV and weather-resistant rubber caps for longer lifespan.
• Keep extra spare caps for quick replacement in hotels, schools, or factories where furniture is moved frequently.

 

✅ Benefits After Proper Installation

Once installed correctly, RUBASIA’s Round External Rubber Caps will:

• Protect floors from scratches and marks.
• Reduce noise when furniture is moved.
• Prevent slipping or sliding on smooth floors.
• Block moisture and dust from pipe interiors.
• Give a professional, finished look to furniture or structures.