Details

---

How to Install Your PVC Strip Curtains: A Step-by-Step Guide

Installing RUBASIA RUBBERTECH’s Polar Grade PVC Strip Curtains is a straightforward process that can significantly improve your facility's efficiency. This guide will walk you through the installation, whether you're in Kota Kinabalu, Kuching, or Brunei.

 

Tools & Materials You Will Need

• RUBASIA PVC Strip Curtains (2mm thick x 200mm wide)
• A suitable mounting system (Aluminum or Stainless-Steel track/channel)
• Measuring Tape
• A Sharp Utility Knife or Heavy-Duty Scissors
• A Steel Straight Edge or Ruler
• A Power Drill
• Drill Bits (suitable for your wall/door frame material)
• Screws (usually provided with the track)
• A Ladder or Stepladder
• Safety Glasses (recommended when cutting)

 

Step-by-Step Installation Instructions

 

Step 1: Measure Your Doorway Accurately

• Width (W): Measure the exact width of the door or opening where the curtains will be hung.
• Height (H): Measure from the top of the intended mounting point down to the floor.
• Calculation: To ensure full coverage and a proper seal, the total width of PVC strips needed should be approximately 1.2 to 1.5 times the width of the opening. This provides the necessary overlap between strips.

 

Step 2: Cut the Strips to Length

• Safety First: Wear safety glasses to protect your eyes from any PVC fragments.
• Unroll the PVC strip on a clean, flat, and protected surface.
• Measure and Mark the desired length on the strip. Remember to account for the height of the track itself. A common length is from the track to about 2-4 inches (5-10 cm) above the floor.
• Cut Carefully: Use a sharp utility knife and a straight edge to score the strip along your mark. Bend the strip along the score line to snap it cleanly. Alternatively, heavy-duty scissors can be used, though a knife provides the cleanest cut.

 

Step 3: Install the Mounting Track

• Position the Track: Hold the aluminum track firmly in place at the top of the doorway. Ensure it is perfectly level using a spirit level.
• Mark Drill Holes: Mark the positions of the screw holes on the door frame or lintel.
• Drill Pilot Holes: Drill pilot holes at the marked points to make driving the screws easier and to prevent splitting.
• Secure the Track: Align the track with the pilot holes and screw it firmly into place. Ensure it is secure and can bear the weight of the curtains.

 

Step 4: Load the Strips into the Track

• Insert the Strips: Starting at one end of the track, begin inserting the top of each cut PVC strip into the channel.
• Create Overlap: For an effective seal, install the strips so they overlap each other by approximately 25-50mm (1-2 inches). A typical pattern is to alternate the direction of the overlap (e.g., one strip overlapping inward, the next overlapping outward) for better stability and coverage.
• Fill the Track: Continue loading strips until the entire track is filled across the width of the doorway.

 

Step 5: Final Checks & Adjustments

• Check Movement: Gently push through the curtains to ensure they move freely and return to their closed, overlapping position.
• Verify Seal: Look for any significant gaps at the sides or between strips. Add more strips if necessary to improve the seal.
• Trim if Necessary: If any strips are uneven, trim them to a consistent length for a neat appearance and optimal function.

 

Professional Installation Tips

• For High Traffic Areas: In doors frequently used by forklifts, consider installing a protective bar at bumper height on either side of the doorway to prevent damage to the strips.
• Choosing the Right Track: For freezer applications, a stainless-steel track is highly recommended to resist corrosion.
• Order Extra: It's always wise to order a few extra meters of strip material to allow for mistakes during cutting or for future repairs.
• Need Help? For large or complex installations across Sabah, Sarawak, and Brunei, consider using a professional installer. Contact RUBASIA RUBBERTECH for local recommendations.

 

Ready for Installation? Get Your Supplies Now.

RUBASIA RUBBERTECH supplies high-quality 2mm Clear Blue Polar Grade PVC strips and compatible mounting tracks to all of Borneo.

 

We deliver to locations including:

• Sabah: Kota Kinabalu, Sandakan, Tawau, Lahad Datu, Keningau
• Sarawak: Kuching, Miri, Sibu, Bintulu, Limbang
• Brunei: Bandar Seri Begawan, Kuala Belait, Seria

 

Contact us today to purchase your PVC curtain supplies and get expert advice on your specific installation.