Details

---

Installation Guide – Stainless Steel Curtain Rail & Hanger

Installing the RUBASIA RUBBERTECH INDUSTRIES Stainless Steel Curtain Rail & Hanger system is simple and can be done by maintenance teams, contractors, or facility managers. Proper installation ensures that the PVC strip curtains are securely mounted, provide maximum efficiency, and withstand heavy usage in industrial and commercial environments.

 

🔹 Step-by-Step Installation Instructions

1. Measure Doorway or Opening

• Measure the width and height of the doorway where the PVC strip curtain will be installed.
• Choose the correct rail length:
  • 1 meter (6 clamps included) for smaller openings.
  • 1.2 meter (8 clamps included) for larger openings.
• For extra-wide doors (such as in warehouses or airports in Kota Kinabalu, Kuching, or Bandar Seri Begawan), connect multiple rails side by side.

 

2. Prepare Mounting Surface

• Ensure the wall, ceiling, or door frame is strong enough to support the stainless-steel rail.
• Clean the surface to remove dust, grease, or loose particles for a secure fit.
• Mark drill points using the pre-drilled holes on the rail as a template.

 

3. Fix the Stainless Steel Rail

• Drill holes into the marked points.
• Use heavy-duty expansion bolts or stainless-steel screws depending on whether you’re mounting on concrete, brick, or steel frames.
• Secure the rail firmly in place, ensuring it is level and straight.

 

4. Install the Clamps

• Slide the clamps (150mm wide) into the rail slots.
• For 1 meter rails, attach 6 clamps evenly spaced.
• For 1.2 meter rails, attach 8 clamps evenly spaced.
• Ensure clamps are firmly locked in place before attaching strips.

 

5. Attach PVC Strips

• Cut PVC strips from the roll (standard size: 3mm thick x 300mm wide).
• Recommended overlap: 50% for dust and insect control, 75% for cold room insulation.
• Insert the top of each strip into the clamp and secure with screws or locking plates.
• Repeat until all clamps are fitted with PVC strips.

 

6. Test the Curtain

• Swing PVC strips back and forth to check smooth movement.
• Ensure there are no gaps at the top or sides.
• Verify that people, trolleys, and forklifts can pass easily without strips detaching.

 

7. Maintenance & Adjustments

• Periodically check clamps for tightness, especially in high-traffic warehouses in Bintulu, Miri, and Kuala Belait.
• Replace worn or damaged PVC strips quickly without dismantling the entire rail.
• Wash stainless steel rails with mild detergent to maintain hygiene in food processing areas in Sandakan, Lahad Datu, and Sibu.

 

🔹 Installation Locations Across Borneo

Our curtain rails are commonly installed in:

• Sabah: Cold rooms in Kota Kinabalu, seafood factories in Tawau, palm oil refineries in Lahad Datu, and warehouses in Sandakan.
• Sarawak: Food processing plants in Kuching, timber warehouses in Kapit, frozen storage in Sibu, and logistics hubs in Bintulu.
• Brunei: Supermarkets in Bandar Seri Begawan, refrigerated warehouses in Kuala Belait, and pharmaceutical facilities in Tutong.

 

✅ With the correct installation, the RUBASIA RUBBERTECH INDUSTRIES Stainless Steel Curtain Rail & Hanger ensures long-lasting durability, hygiene, and energy savings for your facility.